Jack antenna installation manual

How-To Video: Install Your KING Jack OA / OA HDTV Antenna Questions about how to install your KING Jack / TV antenna? Check out our new anima.  · Installation for the King Jack Antenna took about 2 hours. The roof top portion wasn’t difficult, but I took extra time to ensure all directions were followed, testing before everything was screwed in place and following up with a liberal use of lap sealant around all mounting surfaces and the tops of the screws. About the instructions, read them www.doorway.ruted Reading Time: 6 mins. 1. Turn off antenna power injector at wall switch or A/V switch and raise the existing antenna. 2. Attach the RV antenna bracket to the KING Jack antenna with the 4 supplied sets of lock washers and screws. 3. Unscrew coax cable and remove existing bat wing style antenna (if present) from the retractable arm (keep retaining pins and clips).

Before starting step 1, turn the adjustable connector in one direction until the antenna hits the stop. Now turn the connector all the way in the other direction until the antenna hits the stop again (slightly more than °). THE ANTENNA MUST ROTATE FREELY THRU THE ENTIRE DISTANCE. INTERIOR ENCLOSURE INSTALLATION. Installation for the King Jack Antenna took about 2 hours. The roof top portion wasn’t difficult, but I took extra time to ensure all directions were followed, testing before everything was screwed in place and following up with a liberal use of lap sealant around all mounting surfaces and the tops of the screws. About the instructions, read them thoroughly. Jack Digital TV Antenna Installation Guide Our motorhome came with a bat wing style antenna made by Antennatek, apparently a knock-off of the Winegard Sensar III antenna.. Being it was a knock-off, we could not add the Winegard Wingman to increase HD reception so it was either replace it with a Winegard Sensar IV or go with the Jack Digital Antenna from King Cont.

Automatic Amplified Local Broadcast HD TV Antenna Connect the included coax cable to the F-jack on the page 4 for instructions on re-installing. The KING JACK antenna is an amplified antenna that requires +12 volts power. STEP 4: Read the OPERATING INSTRUCTIONS on page 4 for antenna pointing. Again, the instruction provided the process – turn on power, turn attenuator clockwise, turn antenna until last LED lights, turn attenuator.