James hardie rab board installation manual

• DO NOT use stain, oil/alkyd base paint, or powder coating on James Hardie® Products. • James Hardie Building Products provides installation/wind load information for buildings with a maximum mean roof height of 85 feet. For information on installations above 60 feet, please contact JH technical support. ¹For additional information on. ® boards important: failure to follow james hardie written installation instructions and comply with applicable building codes may violate local laws, affect building envelope performance and may affect warranty coverage. failure to comply with all health and safety regulations when cutting and installing. Installation Manual 18 It complies with the requirements of Table 23 of E2/AS1. 7 FINISHES AND MAINTENANCE 18 PRODUCT WARRANTY 19 8 James Hardie manufactures a range of rigid air barriers such as HomeRAB® Pre-Cladding and RAB® Board. HomeRAB Pre-Cladding is a mm thick fibre cement sheet which is sealed on the face and edges and is used.

1. HomeRAB Pre-Cladding RAB Board Installation Manual 2. Fire And Acoustic Design Manual 3. BRANZ Appraisal James Hardie Rigid Air Barriers 4. CodeMark HomeRAB Pre-Cladding RAB Board. 4 James Hardie Rigid Air Barriers Installation Manual July New Zealand HomeRAB Horizontal Flashing mm long for horizontal joints CODE: HardieBlade™ Saw Blade mm diameter, Poly diamond blade for fast, clean cutting of James Hardie fibre cement. CODE: RAB 6mm Horizontal Flashing mm long for horizontal joints CODE: Contact your James Hardie Sales and Install Representative for product support HARDIE (). Preparation Ensure the drainage plane is intact and all penetrations are sealed. Plan your work, use the proper tools, techniques, and follow installation procedures as covered in this installation manual.

CLD STRUCTURAL CAVITY BATTEN FIXING CLD Structural Cavity Batten must be fixed to the studs over building underlay or RAB Board. The battens are run. 4 HomeRAB Pre-Cladding RAB Board Installation Manual | July New Zealand. 1 Introduction. James Hardie manufactures two pre-cladding products called. Product James Hardie Rigid Air Barriers are a range of rigid wall underlay HomeRAB Pre-Cladding and RAB Board sheet fixing gun driven 50 x mm.